< Back to the category list

MATRIX-A8

MATRIX-A8 is a core of a music distribution, paging, discussion and zone management system for commercial and fixed installations. It features up to 20 inputs and 20 outputs in a single device powered by a state-of-the-art DSP circuity. Easy to operate and to install thanks to an intuitive GUI, it offers a large number of remote controllers for a wide range of applications.

  • 8 analog IN x 8 analog OUT
  • 4 digital IN x 4 digital OUT
  • 8 Dante IN x 8 Dante OUT
  • Up to 192 IN x 192 OUT
  • DSP functionalities
  • Fix architecture for easy and quick operation
  • Intuitive GUI with PC and Apps software editor
  • Extended remote controller options

Make an enquiry

https://youtu.be/JJqtnyfSFJs

Matrix System


Video embedding powered by Webilop

MATRIX-A8 is a core of a music distribution, paging, discussion and zone management system for commercial and fixed installations. It features up to 20 inputs and 20 outputs in a single device powered by a state-of-the-art DSP circuity. Easy to operate and to install thanks to an intuitive GUI, it offers a large number of remote controllers for a wide range of applications. 20 x 20 Digital Matrix
  • 8 analog IN / 8 analog OUT via local ports
  • 4 digital IN / 4 digital OUT via local ports to analog panel I/O
  • 8 digital IN / 8 digital OUT via DANTE optional module
  Up to 192 In x 192 Out
    The basic system offers a total of 12 IN x 12 OUT without the Dante option. I/O expansion is possible with 16 pcs devices linked together for a maximum of 192 x IN and 192 x OUT.
  DSP Functions
    Gain, Limiter / Compressor, Ducker, Matrix, Gate / Expander, Feedback Canceler, Parametric EQ, Bandpass Filters, Delay, Crossover Filters, Auto Mixer
  Fix Architecture
    MATRIX-A8 is intended for non-expert customers looking for quick and easy operation. The intuitive GUI utilizes a familiar hardware-like layout to enable a short programming timeline and rapid hardware implementation.
  Software Editor
    The friendly editor makes any setting or modification easy. It reports the control status in real time with clear graphic indications for all functions.
  Didital Connectivity
    MATRIX-A8 uses four types of connections all CAT5e compatible:
  • RCNET, based on RS-485 transfer protocol, for MATRIX link.
  • RD, based on AES3 transfer protocol for point to point digital audio transport plus RS-485 for panel control.
  • Ethernet Dante for multi-channel digital audio transport.
  • Ethernet TCP/IP for LAN
MODEL MATRIX-A8
Analog I/O 8 x 8
Connectors Euroblock 4 x 6-pin, 5 mm pitch,
CODEC CS4272, 24-bit, 48 kHz
MIC Inputs Active balanced
Gain Settings +10 to +60 dB ,1 dB steps
Input Impedance 2.6 kΩ 1%,1 kHz, each leg to ground
Phantom Power +48 VDC, 10 mA max per input
THD+N < 0.01 %, typ   20-20k Hz, +4 dBu
Maximum Input 3 dBV (1.4 Vrms)
Line Inputs Active balanced
Gain Settings +10 to +20 dB ,1 dB steps from +10 to +20
Input Impedance 5.1 kΩ
THD+N < 0.01 % typ 20-20k Hz, +4 dBu
Maximum Input 20.0 dBu
Frequency Response 20-20k Hz, +0, -0.5 dB
Dynamic Range 105 dB max, A weighted
Crosstalk 104 dBu ,20-20k Hz, +20 dBu, ch to ch
Outputs Active balanced
Impedance 200 Ω 1%
Maximum Output +20.0 dBu
Frequency Response 20-20k Hz
Dynamic Range 105 dBu
Crosstalk 110 dB
Indicators
Signal -50 dBu Green LED, peak-reading
Overload -0.5 dBu Red LED, peak-reading
DSP
Processor SHARC ADSP-21489, 450 MHz
Word Length 32 / 64-bit Floating Point
 

You may also like…