< Back to the category list

AXV-42

AXV-42 is a line array design PA system featuring a 12’’ powered subwoofer and a passive column made of three boxes overlaid in one single array. The top and middle satellites are equipped with 3.5’’ drivers and can rotate 90° left and right in order to change the horizontal dispersion..

  • 700 W
  • Variable horizontal coverage
  • 12’’ active subwoofer
  • 5’’ array transducer
  • DSP on board
  • PC control

 

Make an enquiry
AXV-42 is a line array design PA system featuring a 12’’ powered subwoofer and a passive column made of three boxes overlaid in one single array. The top and middle satellites are equipped with 3.5’’ drivers and can rotate 90° left and right in order to change the horizontal dispersion. The bottom part of the column is used as a pole mount for the two upper satellites. The rotation system of the speakers is patented to assure the robustness of the mechanical parts and the quality of electrical contacts. The subwoofer AXV-42SA is equipped with two Class-D 350W amplifiers driven the 12” transducer and both satellites. All controls, inputs and outputs are accessible on the back panel of the subwoofer. 2 x Mic/Line inputs are available on Combo XLR/ ¼” jack plus a RCA connection for a stereo line. The system is equipped with a built in DSP featuring a switch with Center, Open and User positions. Center is used for standard coverage application. Open is set when the satellites are rotated. The third position allows the user to program his own settings via a PC connection.
MODEL AXV-42SA
System Type 12’’ Active Subwoofer Speaker Cabinet
Frequency Response 40 Hz-500 Hz (- 6dB)
Total Amplifier Power 700 W Continuous / 1400 W Program / 2800 W Peak Class-D @ 4 Ohms
Amplifier, Subwoofer 350 W Continuous / 700 W Program / 1400 W Peak Class-D @ 4 Ohms
Amplifier, Satellites 350 W Continuous / 700 W Program / 1400 W Peak Class-D @ 4 Ohms
DSP Presets Center / Open / User
Sensitivity (1W/1m) 96dB
Maximum SPL@1m 130dB
Electronic Protections Over heat / Short Circuit / Digital Compression
Cooling Temperature-controlled fan
Connectors 2 x Combo-XLR/1/4” IN, RCA L&R IN, 1 XLR THRU and MIXOUT
External Controls Volume Control / Switch for Input sensitivity / Switch for mode selection / Power ON with Green LED / Limiter with Red LED / Ground Lift / IP Control
Power Supply 115V / 230V ~ 50/60Hz Power switching
Enclosure Construction Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam, Rubber Feet, Integrated side handles
Mounting Holder with input Jacks for pole
Dimensions (W x H x D) 379 x 500 x 473 mm (14.92” x 19.69” x 18.62”)
Net Weight 21.5 kg (47.40 lbs)
 
MODEL AX Pole
Enclosure Construction Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam
Connector 2 x Electronic Adaptor - 1 x Input Connector for Sub & 1 x Input Connector for Satellite
Dimensions (W x H x D) 700 x 106 x 98 mm (27.56” x 4.20” x 3.86”)
Net Weight 2.7 kg (5.95 lbs)
 
MODEL AXV-42BM (Bottom box) / AXV-42TP (Top box)
System Type 3.5” Passive Speaker
Output Power 120W Continuous, 240W Program, 480W Peak
Sensitivity (1W/1m) 95dB
Maximum SPL@1m 122dB
Frequency Response 160 Hz-20 kHz (- 6dB)
Impedance 8 Ohms
Transducer 4 x 3.5”, 1” (2.54mm) Voice Coil
Crossover Frequency 500 Hz
Dispersion (-6dB) 100° Horizontal
Enclosure Construction Plywood Cabinet, Resistant Black Paint, Metal Grille with Foam
Connectors AXV-42BM : 2 x Electronic Adaptor – 1 x Input Connector for AX Pole & 1 x Input Connector for AXV-42TP AXV-42TP: 1 x Electronic Adaptor – 1 x Input Connector for AXV-42BM or AX Pole.
Dimensions (W x H x D) AXV-42BM: 448 x 107 x 98 mm (17.64” x 4.20” x 3.86”) / AXV-42TP : 422 x 107 x 98 mm (17.61” x 4.20” x 3.86”)
Net Weight AXV-42BM: 3.48 kg (7.67 lb) / AXV-42TP : 3.41 kg (7.52 lb)